제품 세부 사항
| 제품명: | 팽창식 Chafe 사슬 지원 거품에 의하여 채워지는 선창 부유물을 계류하는 SBM 단 하나 부표 | 제품 색상: | 노란색, 주황색 또는 사용자 정의 |
|---|---|---|---|
| 피부: | 폴리우레탄 엘라스토머 스프레이 | 내부 코어: | 폐쇄 셀 EVA/PE 폼 코어 |
| 제품 수명: | 10 년 이상 | 제품 크기: | 유형과 목적에 따라 다릅니다 |
| 엔드 피팅 :: | 1-1/2”스위블 (뜨거운 담긴 아연 도금) | 제품 무게: | 유형과 목적에 따라 다릅니다 |
| 보증: | 2년 | 엔드 피팅: | 다양한 스타일 |
제품 설명
| Attribute | Value |
|---|---|
| Product Name | SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats |
| Product Color | Yellow, orange, or customized |
| Skin | Polyurethane Elastomer |
| Product Lifespan | 10 years |
| Product Size | Varies depending on type and purpose |
| End Fittings | 1-1/2” Swivel (Hot Dipped Galvanized) |
| Product Weight | Varies depending on type and purpose |
| Inner core | Closed cell foam core |
| Warranty | 2 years |
Foam mooring buoys are in service for inland waterways and offshore instead of traditional steel mooring buoys.
The cylindrical mooring buoy is one kind of representative mooring buoy. The cylindrical mooring buoys can be supplied in chain-through type, or equipped with pad-eye, crucifix, quick release hook, and maker or navigation equipment. Other varieties of end fittings are available to suit every case application. All end fittings are made of galvanized or painted steel to resist seawater corrosion.
Application for commercial mooring buoys are offshore and remote mooring, temporary mooring of vessels in a port, dock or harbour, additional mooring for large vessels on berthing/mooring dolphins and longer term mooring for infrequently used vessels.
- Upper end fittings (various options available)
- Resilient out foam (available upon request)
- Rigid inner foam
- Internal steel core
- Load distribution plates
- Lower end fitting (mooring eye shown)
- Reinforced urethane elastomer skin
This drawing shows a typical specification only. For the specific design of each buoy, please feel free to contact us.
The below table shows the most commonly requested size only. The standard color is yellow and orange.
| Type | Height (mm) | Diameter (mm) | Overall Height (mm) | Weight (kg) | Net Buoyancy (kg) | Net Buoyancy (lbs) |
|---|---|---|---|---|---|---|
| CMB1 | 700 | 1500 | 1500 | 161 | 1000 | 2207 |
| CMB3 | 1100 | 2000 | 2200 | 544 | 3000 | 6620 |
| CMB5 | 1500 | 2500 | 2500 | 1104 | 5000 | 11033 |
| CMB8 | 1500 | 2500 | 3100 | 1698 | 8000 | 17652 |
| CMB10 | 1500 | 2500 | 3300 | 1924 | 10000 | 22065 |
| CMB15 | 2000 | 3000 | 3500 | 2886 | 15000 | 33098 |
| CMB20 | 2000 | 3000 | 4000 | 4021 | 20000 | 44131 |
| CMB25 | 2000 | 3000 | 4000 | 5027 | 25000 | 55163 |
| CMB30 | 3000 | 4000 | 4200 | 6650 | 30000 | 66196 |
The mooring buoys can be installed with various fittings on the top. And the mooring buoys can be designed to meet different requests. It has the same design as common mooring buoys.
The large mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not molded into the buoy but slides into a tubular section that runs down the center of the buoy enabling the tube to be replaced at any stage during the product's service life.
Customized size are available upon request.
제품 하이라이트
SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Attributes Attribute Value Product Name SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Color Yellow, orange, or customized Skin Polyurethane Elastomer Product Lifespan 10 years Product Size Varies depending on type and purpose End Fittings 1-1/2” Swivel (Hot Dipped Galvanized) Product Weight Varies depending on type and purpose Inner core Closed cell
조선소 적용을 위한 맞춤형 길이 8-30m 및 100,000DWT 용량의 고압 해양 고무 에어백
조선소용 고압 해양 고무 에어백, 선박 진수, 착륙 및 인양을 위해 설계되었습니다. 맞춤형 3-12겹 타이어 코드 고무는 내구성과 효율성을 보장합니다. LR, BV, CCS 인증을 받았으며 ISO 표준을 준수합니다. 게이지, 밸브 및 커넥터와 같은 액세서리가 포함되어 있습니다. 보증 기간: 2년.
ISO14409 인증 해양 구조 에어백, 10 ~ 40톤/m 적재 용량, 공기 누출 없음
DOOWIN 고무 에어 리프트 백은 합성 타이어 코어 레이어와 전체 랩핑 기술로 비교할 수 없는 내구성을 제공합니다. CCS, BV, ABS 및 LR 인증을 받은 이 해양 구조 에어백은 높은 부력(4-300t), 깊은 수심 작동 및 내마모성을 제공합니다. 난파선 인양, 부교 및 부두 건설을 위해 맞춤형 크기를 사용할 수 있습니다.
요코하마 타입 펜더 공압 해양 고무 펜더 ISO 17357
Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory PriceFloating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as
누출 없는 잠수함 팽창식 고무 펜더 부식 방지
Submarine Inflatable Rubber Fenders with CCS BV Certification Key Features No air leakage design for reliable performance Low reaction force and cost-effective solution High durability with 8-10 year lifespan Energy absorption to reduce impact force Corrosion-resistant materials for underwater use Certifications & Specifications Attribute Value Certifications ISO 17357:2014, CCS, BV, LR, ABS, DNV, GL Structure Sling type Execution Standard ISO17357 Shape Cylindrical
궁금한 점이 있으시면 아래 온라인 문의 양식을 이용해 주십시오. 저희 팀이 최대한 빨리 답변드리겠습니다.
