SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats
Productdetails
| Productnaam: | SBM Enkele Boei Afmeren Opblaasbare Chafe Chain Ondersteuning Schuim Gevulde Dokvlotters | Productkleur: | Geel, oranje of aangepast |
|---|---|---|---|
| Huid: | Polyurethaan-elastomeer spuiten | Innerlijke kern: | Kern van EVA/PE-schuim met gesloten celstructuur |
| Productlevenswerk: | 10+ jaar | Productgrootte: | Varieert afhankelijk van het type en het doel |
| Einde fittingen:: | 1-1/2 "Swivel (heet gedompeld gegalvaniseerd) | Productgewicht: | Varieert afhankelijk van het type en het doel |
| Garantie: | 2 jaar | Eindfittingen: | Meerdere stijlen |
Productbeschrijving
| Attribute | Value |
|---|---|
| Product Name | SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats |
| Product Color | Yellow, orange, or customized |
| Skin | Polyurethane Elastomer |
| Product Lifespan | 10 years |
| Product Size | Varies depending on type and purpose |
| End Fittings | 1-1/2” Swivel (Hot Dipped Galvanized) |
| Product Weight | Varies depending on type and purpose |
| Inner core | Closed cell foam core |
| Warranty | 2 years |
Foam mooring buoys are in service for inland waterways and offshore instead of traditional steel mooring buoys.
The cylindrical mooring buoy is one kind of representative mooring buoy. The cylindrical mooring buoys can be supplied in chain-through type, or equipped with pad-eye, crucifix, quick release hook, and maker or navigation equipment. Other varieties of end fittings are available to suit every case application. All end fittings are made of galvanized or painted steel to resist seawater corrosion.
Application for commercial mooring buoys are offshore and remote mooring, temporary mooring of vessels in a port, dock or harbour, additional mooring for large vessels on berthing/mooring dolphins and longer term mooring for infrequently used vessels.
- Upper end fittings (various options available)
- Resilient out foam (available upon request)
- Rigid inner foam
- Internal steel core
- Load distribution plates
- Lower end fitting (mooring eye shown)
- Reinforced urethane elastomer skin
This drawing shows a typical specification only. For the specific design of each buoy, please feel free to contact us.
The below table shows the most commonly requested size only. The standard color is yellow and orange.
| Type | Height (mm) | Diameter (mm) | Overall Height (mm) | Weight (kg) | Net Buoyancy (kg) | Net Buoyancy (lbs) |
|---|---|---|---|---|---|---|
| CMB1 | 700 | 1500 | 1500 | 161 | 1000 | 2207 |
| CMB3 | 1100 | 2000 | 2200 | 544 | 3000 | 6620 |
| CMB5 | 1500 | 2500 | 2500 | 1104 | 5000 | 11033 |
| CMB8 | 1500 | 2500 | 3100 | 1698 | 8000 | 17652 |
| CMB10 | 1500 | 2500 | 3300 | 1924 | 10000 | 22065 |
| CMB15 | 2000 | 3000 | 3500 | 2886 | 15000 | 33098 |
| CMB20 | 2000 | 3000 | 4000 | 4021 | 20000 | 44131 |
| CMB25 | 2000 | 3000 | 4000 | 5027 | 25000 | 55163 |
| CMB30 | 3000 | 4000 | 4200 | 6650 | 30000 | 66196 |
The mooring buoys can be installed with various fittings on the top. And the mooring buoys can be designed to meet different requests. It has the same design as common mooring buoys.
The large mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not molded into the buoy but slides into a tubular section that runs down the center of the buoy enabling the tube to be replaced at any stage during the product's service life.
Customized size are available upon request.
Hoogtepunten van het product
SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Attributes Attribute Value Product Name SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Color Yellow, orange, or customized Skin Polyurethane Elastomer Product Lifespan 10 years Product Size Varies depending on type and purpose End Fittings 1-1/2” Swivel (Hot Dipped Galvanized) Product Weight Varies depending on type and purpose Inner core Closed cell
Hogedruk Marine Rubber Airbags met Aanpasbare Lengte 8-30m en 100.000 DWT Capaciteit voor Scheepswerftoepassingen
Hogedruk marine rubber airbags voor scheepswerven, ontworpen voor het te water laten, aanmeren en bergen van schepen. Aanpasbare 3-12 lagen van bandkordrubber garanderen duurzaamheid en efficiëntie. Gecertificeerd door LR, BV, CCS en voldoen aan ISO-normen. Inclusief accessoires zoals manometer, ventiel en connectoren. Garantie: 2 jaar.
ISO14409 gecertificeerde marine bergingsairbags met 10 ~ 40 ton/m laadvermogen en geen luchtlekkage
DOOWIN Rubber Air Lift Bags bieden ongeëvenaarde duurzaamheid met synthetische bandkernlagen en Holistic Wrapping Technology. Gecertificeerd door CCS, BV, ABS en LR, bieden deze marine bergingsairbags een hoge drijfkracht (4-300t), diepwaterwerking en slijtvastheid. Aangepaste maten beschikbaar voor scheepswrakberging, drijvende bruggen en dokconstructie.
Pierbeschermingsveld Yokohama Type Fender Pneumatische Marine Rubber Fender ISO 17357
Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory PriceFloating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as
Lekkagevrije Opblaasbare Rubberen Fender Corrosiebestendig
Submarine Inflatable Rubber Fenders with CCS BV Certification Key Features No air leakage design for reliable performance Low reaction force and cost-effective solution High durability with 8-10 year lifespan Energy absorption to reduce impact force Corrosion-resistant materials for underwater use Certifications & Specifications Attribute Value Certifications ISO 17357:2014, CCS, BV, LR, ABS, DNV, GL Structure Sling type Execution Standard ISO17357 Shape Cylindrical
Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.
