SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats
Produktdetails
| Produktname: | SBM Single Booy Mooring aufblasbare Chafe Chain Support Schaum gefüllte Dock Floats | Produktfarbe: | Gelb, orange oder angepasst |
|---|---|---|---|
| Haut: | Sprühen von Polyurethan-Elastomer | Innerer Kern: | Geschlossenzelliger EVA/PE-Schaumkern |
| Produktlebensdauer: | 10+ Jahre | Produktgröße: | Variiert je nach Typ und Zweck |
| Endarmatur:: | 1-1/2 ”schwenkbar (heiß getauchte verzinkt) | Produktgewicht: | Variiert je nach Typ und Zweck |
| Garantie: | 2 Jahre | Endarmatur: | Mehrere Stile |
Produktbeschreibung
| Attribute | Value |
|---|---|
| Product Name | SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats |
| Product Color | Yellow, orange, or customized |
| Skin | Polyurethane Elastomer |
| Product Lifespan | 10 years |
| Product Size | Varies depending on type and purpose |
| End Fittings | 1-1/2” Swivel (Hot Dipped Galvanized) |
| Product Weight | Varies depending on type and purpose |
| Inner core | Closed cell foam core |
| Warranty | 2 years |
Foam mooring buoys are in service for inland waterways and offshore instead of traditional steel mooring buoys.
The cylindrical mooring buoy is one kind of representative mooring buoy. The cylindrical mooring buoys can be supplied in chain-through type, or equipped with pad-eye, crucifix, quick release hook, and maker or navigation equipment. Other varieties of end fittings are available to suit every case application. All end fittings are made of galvanized or painted steel to resist seawater corrosion.
Application for commercial mooring buoys are offshore and remote mooring, temporary mooring of vessels in a port, dock or harbour, additional mooring for large vessels on berthing/mooring dolphins and longer term mooring for infrequently used vessels.
- Upper end fittings (various options available)
- Resilient out foam (available upon request)
- Rigid inner foam
- Internal steel core
- Load distribution plates
- Lower end fitting (mooring eye shown)
- Reinforced urethane elastomer skin
This drawing shows a typical specification only. For the specific design of each buoy, please feel free to contact us.
The below table shows the most commonly requested size only. The standard color is yellow and orange.
| Type | Height (mm) | Diameter (mm) | Overall Height (mm) | Weight (kg) | Net Buoyancy (kg) | Net Buoyancy (lbs) |
|---|---|---|---|---|---|---|
| CMB1 | 700 | 1500 | 1500 | 161 | 1000 | 2207 |
| CMB3 | 1100 | 2000 | 2200 | 544 | 3000 | 6620 |
| CMB5 | 1500 | 2500 | 2500 | 1104 | 5000 | 11033 |
| CMB8 | 1500 | 2500 | 3100 | 1698 | 8000 | 17652 |
| CMB10 | 1500 | 2500 | 3300 | 1924 | 10000 | 22065 |
| CMB15 | 2000 | 3000 | 3500 | 2886 | 15000 | 33098 |
| CMB20 | 2000 | 3000 | 4000 | 4021 | 20000 | 44131 |
| CMB25 | 2000 | 3000 | 4000 | 5027 | 25000 | 55163 |
| CMB30 | 3000 | 4000 | 4200 | 6650 | 30000 | 66196 |
The mooring buoys can be installed with various fittings on the top. And the mooring buoys can be designed to meet different requests. It has the same design as common mooring buoys.
The large mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not molded into the buoy but slides into a tubular section that runs down the center of the buoy enabling the tube to be replaced at any stage during the product's service life.
Customized size are available upon request.
Produkthighlights
SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Attributes Attribute Value Product Name SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Color Yellow, orange, or customized Skin Polyurethane Elastomer Product Lifespan 10 years Product Size Varies depending on type and purpose End Fittings 1-1/2” Swivel (Hot Dipped Galvanized) Product Weight Varies depending on type and purpose Inner core Closed cell
Hochdruck-Marine-Gummiluftsäcke mit anpassbarer Länge von 8-30 m und 100.000 DWT Kapazität für Werftanwendungen
Hochdruck-Marine-Gummiluftkissen für Werften, konzipiert für den Schiffsstart, die Landung und die Bergung. Anpassbare 3-12 Lagen Reifenkordelgummi gewährleisten Haltbarkeit und Effizienz. Zertifiziert von LR, BV, CCS und konform mit ISO-Standards. Beinhaltet Zubehör wie Manometer, Ventil und Anschlüsse. Garantie: 2 Jahre.
ISO14409-zertifizierte Marine-Bergungs-Airbags mit 10 ~ 40 Tonnen/m Tragfähigkeit und ohne Luftaustritt
DOOWIN Gummi-Hebebälle bieten unübertroffene Haltbarkeit mit synthetischen Reifenkernschichten und ganzheitlicher Wickeltechnologie. Zertifiziert von CCS, BV, ABS und LR, bieten diese Bergungs-Airbags für den maritimen Bereich hohen Auftrieb (4-300 t), Tiefwasserbetrieb und Abriebfestigkeit. Sondergrößen für Schiffswrackbergung, Schwimmbrücken und Dockbau verfügbar.
Pier-Schutzfeld Yokohama Typ Fender Pneumatischer Marine-Gummifender ISO 17357
Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory PriceFloating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as
Kein Leckage U-Boot Aufblasbarer Gummifender Korrosionsbeständig
Submarine Inflatable Rubber Fenders with CCS BV Certification Key Features No air leakage design for reliable performance Low reaction force and cost-effective solution High durability with 8-10 year lifespan Energy absorption to reduce impact force Corrosion-resistant materials for underwater use Certifications & Specifications Attribute Value Certifications ISO 17357:2014, CCS, BV, LR, ABS, DNV, GL Structure Sling type Execution Standard ISO17357 Shape Cylindrical
Bitte nutzen Sie unser Online-Kontaktformular unten, wenn Sie Fragen haben. Unser Team wird sich so schnell wie möglich bei Ihnen melden.
