SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats
Detalhes do produto
| Nome do produto: | Boia única de SBM que amarra flutuadores de doca enchidos com espuma de suporte de corrente de atrit | Cor do produto: | Amarelo, laranja ou personalizado |
|---|---|---|---|
| Pele: | Pulverização de elastômero de poliuretano | Núcleo interno: | Núcleo de espuma EVA/PE de célula fechada |
| Vida útil do produto: | Mais de 10 anos | Tamanho do produto: | Varia dependendo do tipo e propósito |
| End Acessars:: | 1-1/2 ”giratório (galvanizado a quente) | Peso do produto: | Varia dependendo do tipo e propósito |
| Garantia: | 2 anos | Acumulações finais: | Múltiplas formas |
Descrição do produto
| Attribute | Value |
|---|---|
| Product Name | SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats |
| Product Color | Yellow, orange, or customized |
| Skin | Polyurethane Elastomer |
| Product Lifespan | 10 years |
| Product Size | Varies depending on type and purpose |
| End Fittings | 1-1/2” Swivel (Hot Dipped Galvanized) |
| Product Weight | Varies depending on type and purpose |
| Inner core | Closed cell foam core |
| Warranty | 2 years |
Foam mooring buoys are in service for inland waterways and offshore instead of traditional steel mooring buoys.
The cylindrical mooring buoy is one kind of representative mooring buoy. The cylindrical mooring buoys can be supplied in chain-through type, or equipped with pad-eye, crucifix, quick release hook, and maker or navigation equipment. Other varieties of end fittings are available to suit every case application. All end fittings are made of galvanized or painted steel to resist seawater corrosion.
Application for commercial mooring buoys are offshore and remote mooring, temporary mooring of vessels in a port, dock or harbour, additional mooring for large vessels on berthing/mooring dolphins and longer term mooring for infrequently used vessels.
- Upper end fittings (various options available)
- Resilient out foam (available upon request)
- Rigid inner foam
- Internal steel core
- Load distribution plates
- Lower end fitting (mooring eye shown)
- Reinforced urethane elastomer skin
This drawing shows a typical specification only. For the specific design of each buoy, please feel free to contact us.
The below table shows the most commonly requested size only. The standard color is yellow and orange.
| Type | Height (mm) | Diameter (mm) | Overall Height (mm) | Weight (kg) | Net Buoyancy (kg) | Net Buoyancy (lbs) |
|---|---|---|---|---|---|---|
| CMB1 | 700 | 1500 | 1500 | 161 | 1000 | 2207 |
| CMB3 | 1100 | 2000 | 2200 | 544 | 3000 | 6620 |
| CMB5 | 1500 | 2500 | 2500 | 1104 | 5000 | 11033 |
| CMB8 | 1500 | 2500 | 3100 | 1698 | 8000 | 17652 |
| CMB10 | 1500 | 2500 | 3300 | 1924 | 10000 | 22065 |
| CMB15 | 2000 | 3000 | 3500 | 2886 | 15000 | 33098 |
| CMB20 | 2000 | 3000 | 4000 | 4021 | 20000 | 44131 |
| CMB25 | 2000 | 3000 | 4000 | 5027 | 25000 | 55163 |
| CMB30 | 3000 | 4000 | 4200 | 6650 | 30000 | 66196 |
The mooring buoys can be installed with various fittings on the top. And the mooring buoys can be designed to meet different requests. It has the same design as common mooring buoys.
The large mooring tube with 82.5mm ID will accept mooring chain of up to 20mm in diameter. The mooring tube is not molded into the buoy but slides into a tubular section that runs down the center of the buoy enabling the tube to be replaced at any stage during the product's service life.
Customized size are available upon request.
Destaques do produto
SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Attributes Attribute Value Product Name SBM Single Buoy Mooring Inflatable Chafe Chain Support Foam Filled Dock Floats Product Color Yellow, orange, or customized Skin Polyurethane Elastomer Product Lifespan 10 years Product Size Varies depending on type and purpose End Fittings 1-1/2” Swivel (Hot Dipped Galvanized) Product Weight Varies depending on type and purpose Inner core Closed cell
Bóias Pneumáticas de Borracha Marítima de Alta Pressão com Comprimento Personalizável de 8-30m e Capacidade de 100.000DWT para Aplicações em Estaleiros
Bolsas de ar de borracha marítima de alta pressão para estaleiros navais, projetadas para lançamento, aterrissagem e salvamento de navios. Personalizáveis com 3 a 12 camadas de borracha de cabo de pneu garantem durabilidade e eficiência. Certificadas por LR, BV, CCS e em conformidade com as normas ISO. Inclui acessórios como manômetro, válvula e conectores. Garantia: 2 anos.
Airbags de salvamento marítimo certificados ISO14409 com capacidade de carga de 10 ~ 40 toneladas/m e sem vazamento de ar
Os sacos de elevação pneumáticos de borracha DOOWIN oferecem durabilidade incomparável com camadas de núcleo de pneu sintético e Tecnologia de Envolvimento Holístico. Certificados pela CCS, BV, ABS e LR, estes airbags de salvamento marítimo proporcionam alta flutuabilidade (4-300t), operação em águas profundas e resistência à abrasão. Tamanhos personalizados disponíveis para salvamento de naufrágios, pontes flutuantes e construção de docas.
Defensas Pneumáticas para Cais Tipo Yokohama, Defensas de Borracha Pneumáticas Marinhas ISO 17357
Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory PriceFloating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as
Defensas de Borracha Infláveis para Submarinos Sem Vazamento Resistentes à Corrosão
Submarine Inflatable Rubber Fenders with CCS BV Certification Key Features No air leakage design for reliable performance Low reaction force and cost-effective solution High durability with 8-10 year lifespan Energy absorption to reduce impact force Corrosion-resistant materials for underwater use Certifications & Specifications Attribute Value Certifications ISO 17357:2014, CCS, BV, LR, ABS, DNV, GL Structure Sling type Execution Standard ISO17357 Shape Cylindrical
Por favor, use o nosso formulário de contato online abaixo se tiver alguma pergunta, nossa equipe vai voltar para você o mais rápido possível.
