<
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
Kwaliteit ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating fabriek
>

ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating

Merknaam: DOOWIN MARINE
Modelnummer: P50,P80
Plaats van herkomst: China
Certificering: BV,GSG,LR,ABS..
Minimale bestelhoeveelheid: 1 ST
Prijs: USD$ 2,000 ~ 2,900
Leveringsvermogen: 100PCs/per maand

Productdetails


Productnaam: Pneumatische Rubberstootkussens Materiaal: ISO 17357 gecertificeerde Yokohama Type Flog pneumatische rubberen spatborden
Sollicitatie: Dokbescherming, bootbescherming Diameter: 0,8 m-4,5 m
Lengte: 1m-9m Standaard: ISO 17357
verpakking: Pallet, ijzeren frame, ect. Certificering: CCS,ABS,LR,BV,DNV
Garantieperiode: 24 maanden Technologie: Hoge druk, anti-explosie
Betaling Iterm: T/T Dlivery -tijd: 10-20 werkdagen
Voordelen: Zachte reactiekracht, tegen schuifkracht, lagere afmeerkracht, ect.
Markeren

ISO 17357 certified pneumatic rubber fender

,

lightweight Yokohama type rubber fender

,

50kPa pressure rated rubber fender

Productbeschrijving

Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory Price

Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.
Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as "Yokohama Fenders" or "Yokohama type fenders" - ISO 17357:2014 Ships and marine technology -- Floating Pneumatic Rubber Fenders
ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating 0
Advantages of Yokohama Pneumatic Rubber Fenders
  • Lightweight design allows for easy handling and installation with guy-ropes or guy-chains
  • Resists shearing force and maintains energy absorption under inclined compression up to 15 degrees
  • Provides low and comparatively even hull pressure
  • Constructed with multiple synthetic-cord layers and tough abrasion-resistant rubber for consistent performance in rough conditions
  • Minimizes maintenance costs and damage risk
  • Self-buoyant design ensures extremely long service life
ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating 1
Yokohama Type Pneumatic Rubber Fenders Construction
Pneumatic rubber marine fenders consist of outer rubber, reinforcement synthetic-tire-cord layer, and inner rubber, vulcanized firmly. Fenders of diameter 2500mm and larger are equipped with safety valves to release excess internal pressure when over-compressed. The properties requirements of outer and inner rubber material comply with ISO 17357:2002.
Outer Rubber
The outer rubber protects the cord layers and inner rubber from abrasion and external forces. This rubber compound has sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
Tire Cord Layers
The reinforcement synthetic-tire-cord layer is strong enough to maintain the internal air pressure of the fender.
Inner Rubber
The inner rubber layer seals the pressurized air inside the fender.
ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating 2
Pneumatic Fenders Classification

Our pneumatic rubber fender’s internal pressure, endurable pressure, and safety-valve setting pressure are fully compliant with ISO 17357.
 
Fender Pressure Rating
There are two initial pressure ratings for our Pneumatic Rubber Fenders. 
    ■  Pneumatic 50 (P50, Initial internal pressure 50kPa)           
    ■  Pneumatic 80 (P80, Initial internal pressure 80kPa)    
 
Pneumatic Fender Type
There are two common types our Pneumatic Rubber Fenders.
■  Type I — Net Type Covered with a chain net, wire net, or fiber net for small size fenders
■  Type II — Sling Type This type of fender has a lifting device on each end, which shall be connected with a guy chain or guy-rope. Without a protection net, easy to handle with lightweight)

ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating 3
 

Yokohama Type Pneumatic Rubber Fenders Application
Floating pneumatic marine ship rubber fenders serve as protective medium for:
  • Ship-to-ship operations (STS)
  • Ship-to-quay (STQ)
  • Ship-to-berthing (STB)


Suitable for various vessels including:
  • Tankers, Gas Carriers and Bulk Cargo Ships
  • Fast ferries and aluminum hulled vessels
  • Temporary or permanent installations
  • Rapid response and emergency rendering
  • Stand-off fenders to realign ships with shore facilities
Floating Pneumatic Rubber Fender Performance
Performance is specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.
D x L (mm) P50 GEA (kNm) P50 Reaction Force (kN) P50 Hull Pressure (kN/m²) P80 GEA (kNm) P80 Reaction Force (kN) P80 Hull Pressure (kN/m²)
500x1000 6 64 132 8 85 174
600x1000 8 74 126 11 98 166
1000x1500 32 182 122 45 239 160
1000x2000 45 257 132 63 338 174
1200x2000 63 297 126 88 390 166
1350x2500 102 427 130 142 561 170
1500x3000 153 579 132 214 761 174
1700x3000 191 639 128 267 840 168
2000x3500 208 875 128 430 1150 168
2500x5000 663 1381 137 925 1815 180
3000x6000 943 2019 148 1317 2653 195
3300x4500 1175 1884 130 1640 2476 171
3300x6500 1814 3015 146 2532 3961 179
ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with Lightweight Design and 50kPa Pressure Rating 4

Hoogtepunten van het product

Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory Price Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as ...

Gerelateerde producten
Kwaliteit Luchtzakken van hoge druk van maritiem rubber fabriek

Luchtzakken van hoge druk van maritiem rubber

Hogedruk marine rubber airbags voor scheepswerven, ontworpen voor het te water laten, aanmeren en bergen van schepen. Aanpasbare 3-12 lagen van bandkordrubber garanderen duurzaamheid en efficiëntie. Gecertificeerd door LR, BV, CCS en voldoen aan ISO-normen. Inclusief accessoires zoals manometer, ventiel en connectoren. Garantie: 2 jaar.

Kwaliteit Scheepslanceer- en Maritieme Bergingsairbags fabriek

Scheepslanceer- en Maritieme Bergingsairbags

DOOWIN Rubber Air Lift Bags bieden ongeëvenaarde duurzaamheid met synthetische bandkernlagen en Holistic Wrapping Technology. Gecertificeerd door CCS, BV, ABS en LR, bieden deze marine bergingsairbags een hoge drijfkracht (4-300t), diepwaterwerking en slijtvastheid. Aangepaste maten beschikbaar voor scheepswrakberging, drijvende bruggen en dokconstructie.

Kwaliteit Pierbeschermingsveld Yokohama Type Fender Pneumatische Marine Rubber Fender ISO 17357 fabriek

Pierbeschermingsveld Yokohama Type Fender Pneumatische Marine Rubber Fender ISO 17357

Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory Price Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures. Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as

Kwaliteit China Onderzeeër Opblaasbare Pneumatische Rubberen Stootwillen CCS BV Certificering fabriek

China Onderzeeër Opblaasbare Pneumatische Rubberen Stootwillen CCS BV Certificering

China Submarine Inflatable Pneumatic Rubber Fenders CCS BV Certification Description Submarine inflatable fenders are widely used in scenarios such as submarine docking, maintenance, and offshore operations. Fenders can provide effective protective support when submarines enter and exit ports, dock, or perform other underwater operations, ensuring the safety and security of the submarine hull. In addition, fenders are also suitable for the protection needs of water facilities

Vraag een offerte aan

Gebruik ons online contactformulier als u vragen heeft, ons team zal u zo snel mogelijk contacteren.

Je kunt maximaal 5 bestanden uploaden en elk bestand maximaal 10M.