ISO 17357 Certified Yokohama Type Pneumatic Rubber Fender with 50kPa Pressure Rating and Anti-Explosion Technology
제품 세부 사항
| 제품명: | 공기 고무 방현재 | 재료: | ISO 17357 인증 요코하마 유형 Flog 공압 고무 펜더 |
|---|---|---|---|
| 애플리케이션: | 도크 보호, 보트 보호 | 지름: | 0.8m-4.5m |
| 길이: | 1분~9분 | 기준: | ISO 17357 |
| 포장: | 팔레트, 철 프레임 등. | 인증: | CCS,ABS,LR,BV,DNV |
| 보증기간: | 24개월 | 기술: | 고압, 방폭 |
| 이터텀 지불: | 티/티 | dlivery 시간: | 10-20 영업일 |
| 장점: | 부드러운 반력, 전단력에 대한 반력, 낮은 계류력 등. | ||
| 강조하다 |
ISO 17357 certified pneumatic rubber fender,Yokohama type rubber fender with anti-explosion,50kPa pressure rated pneumatic fender |
||
제품 설명
Pneumatic Rubber Fender for Marine Yacht Boat High Quality, with Stainless Steel Chain Tires
Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures.
- Lightweight design allows for easy handling and installation with guy-ropes or guy-chains
- Resists shearing force and maintains energy absorption under inclined compression up to 15 degrees
- Provides low and comparatively even hull pressure
- Constructed with multiple synthetic-cord layers and tough abrasion-resistant rubber for consistent performance in rough conditions
- Minimizes maintenance costs and damage risk
- Self-buoyant design ensures extremely long service life
Our pneumatic rubber fender’s internal pressure, endurable pressure, and safety-valve setting pressure are fully compliant with ISO 17357.
Fender Pressure Rating
There are two initial pressure ratings for our Pneumatic Rubber Fenders.
■ Pneumatic 50 (P50, Initial internal pressure 50kPa)
■ Pneumatic 80 (P80, Initial internal pressure 80kPa)
Pneumatic Fender Type
There are two common types our Pneumatic Rubber Fenders.
■ Type I — Net Type Covered with a chain net, wire net, or fiber net for small size fenders
■ Type II — Sling Type This type of fender has a lifting device on each end, which shall be connected with a guy chain or guy-rope. Without a protection net, easy to handle with lightweight)
- Ship-to-ship operations (STS)
- Ship-to-quay (STQ)
- Ship-to-berthing (STB)
- Tankers, Gas Carriers and Bulk Cargo Ships
- Fast ferries and aluminum hulled vessels
- Temporary or permanent installations
- Rapid response and emergency rendering
- Stand-off fenders to realign ships with shore facilities
| D x L (mm) | P50 GEA (kNm) | P50 Reaction Force (kN) | P50 Hull Pressure (kN/m²) | P80 GEA (kNm) | P80 Reaction Force (kN) | P80 Hull Pressure (kN/m²) |
|---|---|---|---|---|---|---|
| 500x1000 | 6 | 64 | 132 | 8 | 85 | 174 |
| 600x1000 | 8 | 74 | 126 | 11 | 98 | 166 |
| 1000x1500 | 32 | 182 | 122 | 45 | 239 | 160 |
| 1000x2000 | 45 | 257 | 132 | 63 | 338 | 174 |
| 1200x2000 | 63 | 297 | 126 | 88 | 390 | 166 |
| 1350x2500 | 102 | 427 | 130 | 142 | 561 | 170 |
| 1500x3000 | 153 | 579 | 132 | 214 | 761 | 174 |
| 1700x3000 | 191 | 639 | 128 | 267 | 840 | 168 |
| 2000x3500 | 208 | 875 | 128 | 430 | 1150 | 168 |
| 2500x5000 | 663 | 1381 | 137 | 925 | 1815 | 180 |
| 3000x6000 | 943 | 2019 | 148 | 1317 | 2653 | 195 |
| 3300x4500 | 1175 | 1884 | 130 | 1640 | 2476 | 171 |
| 3300x6500 | 1814 | 3015 | 146 | 2532 | 3961 | 179 |
제품 하이라이트
Pneumatic Rubber Fender for Marine Yacht Boat High Quality, with Stainless Steel Chain Tires Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers ...
고압 항해용 고무 에어백
조선소용 고압 해양 고무 에어백, 선박 진수, 착륙 및 인양을 위해 설계되었습니다. 맞춤형 3-12겹 타이어 코드 고무는 내구성과 효율성을 보장합니다. LR, BV, CCS 인증을 받았으며 ISO 표준을 준수합니다. 게이지, 밸브 및 커넥터와 같은 액세서리가 포함되어 있습니다. 보증 기간: 2년.
선박 발사 해상 구조 에어백
DOOWIN 고무 에어 리프트 백은 합성 타이어 코어 레이어와 전체 랩핑 기술로 비교할 수 없는 내구성을 제공합니다. CCS, BV, ABS 및 LR 인증을 받은 이 해양 구조 에어백은 높은 부력(4-300t), 깊은 수심 작동 및 내마모성을 제공합니다. 난파선 인양, 부교 및 부두 건설을 위해 맞춤형 크기를 사용할 수 있습니다.
요코하마 타입 펜더 공압 해양 고무 펜더 ISO 17357
Pier protection field Yokohama Type Pneumatic Large Ship Marine Rubber Fenders with Reasonable Factory Price Floating Ship Yokohama Type Marine Pneumatic Rubber Fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside to enable them to float on water and function as shock absorbers between ships (ship-to-ship) or between ships and berthing structures. Note: The floating ship pneumatic rubber fenders have sometimes been colloquially referred to as
중국 잠수함 팽창식 공압 고무 펜더 CCS BV 인증
China Submarine Inflatable Pneumatic Rubber Fenders CCS BV Certification Description Submarine inflatable fenders are widely used in scenarios such as submarine docking, maintenance, and offshore operations. Fenders can provide effective protective support when submarines enter and exit ports, dock, or perform other underwater operations, ensuring the safety and security of the submarine hull. In addition, fenders are also suitable for the protection needs of water facilities
궁금한 점이 있으시면 아래 온라인 문의 양식을 이용해 주십시오. 저희 팀이 최대한 빨리 답변드리겠습니다.
